Water leaks from your residential plumbing system can be highly detrimental if the damage is not repaired immediately. In general, the flowing water could cause flooding in your home, and the structural damage could be quite extensive. The lingering moisture could increase the risk of microbial fungal growths. In addition, you can incur significant losses through increased water bills. Therefore, it is important for you to have a strategy for identifying leaks in your home. Here are some of the best methods for identifying water leaks in your house.

Install a Leak Sensor

The most efficient method to prevent problems related to plumbing leaks is installing a leak detection system. This is a proactive method of keeping your home safe from flooding. A leak sensor is usually placed strategically in the plumbing network. When a leak is detected, an alarm will sound, allowing you to take immediate action to resolve the leak. You will also find some smart products on the market which can send alerts to devices if the leak sensor is triggered. Regrettably, the cost of installing multiple sensors in residential buildings can be high.

Monitor Sounds

You can identify the presence of a leak in your house by following sounds. If you suspect that there is a leak in your house, you should listen for sounds of trickling water. Ideally, you will need to shut off your plumbing fixtures and appliances such as washing machines and dishwashers. Then, you should walk around the house, particularly the area you suspect of springing a leak. If there is a leak, you should be able to hear the sound of dripping water. Unfortunately, this process works if there is minimal ambient noise.

Check the Flow

It is possible to detect leakages in your house by monitoring the water flow in the meter. This method will not help you pinpoint the location of a leak. However, you will be able to confirm with certainty whether there is a leak in your house, or it is just your imagination. For this process, you will need to locate your water supply meter. This is the device which monitors the amount of water being used. Take note of the indicated reading and then shut down all water outlets in your home. Wait for a couple of hours and check the reading. If there is a change, there is definitely a leak.

Finding and repairing plumbing leaks can be challenging and stressful. Therefore, if you think that your pipes are leaking, consult a licensed plumber who can provide water line leak detection.